Tag:wall=dry_stone

From OpenStreetMap Wiki
(Redirected from Dry stone)
Jump to navigation Jump to search
Public-images-osm logo.svg wall = dry_stone
Dry stone wall building 01.jpg
Description
A dry stone wall is a wall constructed from stones without mortar to bind them together. Show/edit corresponding data item.
Group: barriers
Used on these elements
should not be used on nodesmay be used on waysshould not be used on areasshould not be used on relations (except multipolygon relations)
Requires
Status: de facto

A dry stone wall wall=dry_stone is a wall constructed from stones without mortar to bind them together. Due to the cost associated with repairing dry stone walls many are in a poor state of repair and no longer stock proof.

How to tag

barrier=wall is the primary tag and wall=dry_stone should be used to tag the type of wall as dry stone.

How to map

Create a line along the length of the dry stone wall. Where a dry stone wall joins another dry stone wall use a shared node. If there are substantial gaps in the wall then end that line, leave a gap and create a new way for the next section. If there is a fence adjacent to the dry stone wall to make it stock proof, it is preferable to map the dry stone wall if only one barrier is to be mapped. Where a wall has collapsed but the stones still remain it will still be a useful feature for navigation and should be preferably be mapped. Mark a gate of stile in the wall by creating a node on the way at the appropriate location and tagging it with barrier=gate or barrier=stile or similar. For a short gap consider using a barrier=entrance node.

For other types of barriers that are not dry stone wall (including hedges, ditches and fences) see barrier=*.

See also