From OpenStreetMap Wiki
(Redirected from Guardrail)
Jump to: navigation, search
Available languages — Tag:barrier=guard rail
Afrikaans Alemannisch aragonés asturianu azərbaycanca Bahasa Indonesia Bahasa Melayu Bân-lâm-gú Basa Jawa Baso Minangkabau bosanski brezhoneg català čeština dansk Deutsch eesti English español Esperanto estremeñu euskara français Frysk Gaeilge Gàidhlig galego Hausa hrvatski Igbo interlingua Interlingue isiXhosa isiZulu íslenska italiano Kiswahili Kreyòl ayisyen kréyòl gwadloupéyen Kurdî latviešu Lëtzebuergesch lietuvių magyar Malagasy Malti Nederlands Nedersaksies norsk bokmål norsk nynorsk occitan Oromoo oʻzbekcha/ўзбекча Plattdüütsch polski português português do Brasil română shqip slovenčina slovenščina Soomaaliga suomi svenska Tiếng Việt Türkçe Vahcuengh vèneto Wolof Yorùbá Zazaki српски / srpski беларуская български қазақша македонски монгол русский тоҷикӣ українська Ελληνικά Հայերեն ქართული नेपाली मराठी हिन्दी অসমীয়া বাংলা ਪੰਜਾਬੀ ગુજરાતી ଓଡ଼ିଆ தமிழ் తెలుగు ಕನ್ನಡ മലയാളം සිංහල ไทย မြန်မာဘာသာ ລາວ ភាសាខ្មែរ ⵜⴰⵎⴰⵣⵉⵖⵜ አማርኛ 한국어 日本語 中文(简体)‎ 吴语 粵語 中文(繁體)‎ ייִדיש עברית اردو العربية پښتو سنڌي فارسی ދިވެހިބަސް
Public-images-osm logo.svg barrier = guard_rail
Guardrails Leitplanke Brennerautobahn Italien Suedtirol.jpg
A guard rail is typically a metal rail designed to keep vehicles within their roadway and prevent dangerous collisions
Group: Barriers
Used on these elements
should not be used on nodesmay be used on waysshould not be used on areasshould not be used on relations
See also
Status: ApprovedPage for proposal

barrier=guard_rail is used to identify a continuous barrier raised off the ground by vertical struts to between mid-thigh to mid-chest level (also known as crash barriers or traffic barriers). Note that this tag is not intended for barriers meant to hold people outside of an area, which are also sometimes called "guard rail".

How to map

As with other barriers, create a line along the length of the barrier and nodes at points of intersection. Leave gaps in the line where there is no barrier present.

Guard rails along roadways typically have an inner and outer surface; the inner surface is smooth and faces the roadway, while the outer surface is typically where vertical struts are connected (see example picture in info-box). If there is a clear inner/outer demarcation to the guard rail, construct the line so that the right side is inner and left side is outer.


Below images are views of how barrier=guard_rail is rendered in Potlatch as of December 2012, specifically in the standard (first) and MapQuest (middle) views. Neither the Cycle Map nor Transport Map views render this tag value. The last is an example of aerial imagery showing a section of guardrail in the general area of the map shown in the top two Potlatch images.


See also

There are other barrier types which serve a similar function: Alternative implementations for vehicular safety barriers are

For barriers for example at the edge of cliffs and bridges to prevent people from falling down, see fence_type=railing. There are also some instances of barrier=railing in the database as of September 2014

Some other barrier types should not be confused with barrier=guard_rail, as they concern more preventing vehicles into an area rather than vehicle or personal safety, for instance: