From OpenStreetMap Wiki
(Redirected from No outlet)
Jump to: navigation, search
Available languages — Key:noexit
Afrikaans Alemannisch aragonés asturianu azərbaycanca Bahasa Indonesia Bahasa Melayu Bân-lâm-gú Basa Jawa Baso Minangkabau bosanski brezhoneg català čeština dansk Deutsch eesti English español Esperanto estremeñu euskara français Frysk Gaeilge Gàidhlig galego Hausa hrvatski Igbo interlingua Interlingue isiXhosa isiZulu íslenska italiano Kiswahili Kreyòl ayisyen kréyòl gwadloupéyen Kurdî latviešu Lëtzebuergesch lietuvių magyar Malagasy Malti Nederlands Nedersaksies norsk bokmål norsk nynorsk occitan Oromoo oʻzbekcha/ўзбекча Plattdüütsch polski português português do Brasil română shqip slovenčina slovenščina Soomaaliga suomi svenska Tiếng Việt Türkçe Vahcuengh vèneto Wolof Yorùbá Zazaki српски / srpski беларуская български қазақша македонски монгол русский тоҷикӣ українська Ελληνικά Հայերեն ქართული नेपाली मराठी हिन्दी অসমীয়া বাংলা ਪੰਜਾਬੀ ગુજરાતી ଓଡ଼ିଆ தமிழ் తెలుగు ಕನ್ನಡ മലയാളം සිංහල ไทย မြန်မာဘာသာ ລາວ ភាសាខ្មែរ ⵜⴰⵎⴰⵣⵉⵖⵜ አማርኛ 한국어 日本語 中文(简体)‎ 吴语 粵語 中文(繁體)‎ ייִדיש עברית اردو العربية پښتو سنڌي فارسی ދިވެހިބަސް
Public-images-osm logo.svg noexit
To describe the end of a way.
Group: Properties
Used on these elements
may be used on nodesmay be used on waysshould not be used on areasuse on relations unspecified
Status: In use

Use the noexit=yes tag at the end of a highway=* to indicate that there is no possibility to travel further by any transport mode along a formal path or route. The tag noexit=yes is mainly useful where a road or path ends close to another way but where it isn't possible to get through due to a barrier or other obstruction which may otherwise look like a mistake for a connection to the nearby road. It helps other mappers and quality-check programs to understand the situation correctly.

For this tag it does not matter, if there is a deadend sign at the beginning of the street or not. If you want to tag traffic signs, use traffic_sign=*.

Note: this tag is by no means an access restriction (indicating that passing is not allowed). It must be ignored by routing (GPS). Its purpose is to either confirm a way ends when this way has limited visibility on satellite imagery (e.g. blocked by trees), or to inform quality assurance software or a human reader that an otherwise suspicious tag or road layout preventing passing further than the end of a road is perfectly intentional (More usage instructions).


Use the noexit=yes tag only on the very last node Node at the end of a highway=* or on the last way Way to indicate when doubtful that the impossibility to travel further by any transport mode is perfectly normal, due to otherwise existing road layout.

Note that this tag is only used by any tool when it's tagged on a node Node.

When not to use

This tag should not be used when the way is only a dead-end for one transport mode, but where other modes can continue. By way of example don't use it at the end of a motorised road where a footpath continues. Where a road ends in a turning circle, use highway=turning_circle instead.

It's also not a substitute for the tag barrier=* when the road is stopped by a barrier or wall.

Please don't use it on waterways and railways. For railway-bumpers please use railway=buffer_stop.


In cases where an obstacle like a guard rail or a wall is blocking the passage it is recommended to also map this barrier / feature. If you wish to indicate that a way does continue but that you have been unable to map it for some reason use fixme=continue (or any other text) to show that a way goes further but is not mapped yet. This may often be a very short stub from a road indicating the start of a path or side road.


If tagged on nodes, this tag is rendered on OSMC Reitkarte (a topographic hiking and bridle map) and in the JOSM editor, as the german dead-end sign. German dead-end sign

See also