Nepal remote mapping guide
This Nepal remote mapping guide describes mapping Nepal remotely with OpenStreetMap, including details about typical structures which can be found in Nepal and which will help you to map the region more precisely.
- 1 Introduction
- 2 About This Guide
- 3 The Tasking Manager
- 4 Mapping Tools: For Beginners
- 5 Understanding satellite imagery
- 6 Common Features in Nepal
- 7 Common Issues in Mapping :: For all Levels
- 8 Tagging
Hello mapping volunteers!
This document contains hints, tips and methods to map regions in Nepal with OpenStreetMap (OSM). The training material you here is based on practices developed by people who are both familiar with Nepal and experienced with OSM. However, there is always rooms for improvement, so, please, feel free to add your feedback.
About This Guide
This guide has basic and advanced information about how to map with OSM.
- If you are completely new to OpenStreetMap, you should start with the section called "Mapping Tools: For Beginners."
- If you are ready to start mapping Nepal, move to the section called "Common Features in Nepal." That section shows how to map the typical roads and buildings that you will see in Nepal.
The Tasking Manager
The Tasking Manager guides volunteer mappers to the sections that need mapping most. Follow this link to a short introduction to the Tasking Manager:
Mapping Tools: For Beginners
If you have not mapped with OSM before - no worries!
The best general introduction to mapping OSM in the LearnOSM guide. It is strongly recommended that you go through the LearnOSM tutorials, if you are a beginner.
OSM uses two mapping tools, one called iD and one called JOSM (Java OpenStreetMap). There are tutorials for both.
Mapping with the iD Editor
iD is recommended for those who are completely new to mapping. You can get up to speed with iD in less than an hour. For a tutorial, visit Using the iD Editor (LearnOSM)
Mapping with JOSM
JOSM is a Java-based application for editing OSM which you can run on your desktop.
It has many more features than other editors but takes longer to learn. If you are using JOSM for the first time to contribute to OpenStreetMap, then have a look at one of the various tutorials:
- JOSM Guide (LearnOSM)
- Very brief but nice guide to learn OSM mapping with JOSM
- JOSM Guide wiki
- JOSM Keyboard Shortcuts
Understanding satellite imagery
The satellite images used for HOT mapping sometimes are blurry or dark. Sometimes clouds obscure the scene. Don't worry. Just do your best. Even if some things are missing, your work will be very valuable to the rescuers on the ground.
There are things you can look for in the imagery to help identify what you are seeing:
Shape - Most buildings are rectangular, which makes them easier to identify. But sometimes trees overhang buildings so they don't look perfectly square. As you look, try to see where a tree is covering part of a building, then draw the building as a rectangle. Also, while a river or stream will sort of wander, a canal may be more regular in shape.
Size - Wider roads, even if they are not paved (common in Nepal) can be major ways (primary or secondary roads). See the road classification below.
Patterns - Repetitive arrangements of objects (for example, row houses, temples, row of trees)
Shadows - These can be very useful. Sometimes a shadow shows that a blurry shape is, in fact, a one- or two-story building, or that it is not a building at all but, in fact, a tree. Check the shadows before deciding how to draw or tag a shape.
In the example below, the main road highlighted in red connects to a side road, but not directly, as you might expect. Looking closely you can see the shadow along the side of the main road, which shows that it is above the side road, which joins it further along the curve.
The photo shows other typical features.
- The bright white is a reflective roof or, possibly, a truck with a white roof. If you're not sure, don't map it.
- The buildings along the road are probably shops or little stores, but they also may be houses. We don't know, so, until things are checked by ground crews, we just draw structures as areas and tag them "building."
Common Features in Nepal
Outside of the major cities, few roads are paved. However, they still may be important roads, especially in the mountains.
For mapping this emergency in Nepal we are using a special system of tagging:
- Trunk National Highway (ref=H##): tag is "trunk" (large road, always paved, sometimes more than 2 lanes, connects larger cities and towns).
- Feeder Roads (ref=F##): tag is "primary" (two-lane, usually paved, connect to trunk roads)
- District Roads (ref=D##): tag is "secondary" (two-lane, may or may not be paved)
- Tertiary roads: tag is "tertiary" Usually not paved, one or two lanes, no track line in the middle, connects villages
- Tracks: tag is "track" one-lane, usually a double tire track, within widespread villages or between them.
Offset Roads and Buildings
Some work was done before on Nepal, and you may notice that the locations of the roads or structures do not match the imagery exactly. If the offset or mismatch is consistent across the area you are mapping, Don't correct it! This offset can be corrected automatically when we make the data into maps. It's best to move on to another square and put a note in the Tasking Manager when you do. Someone will fix it.
Nepal is quite hilly. Also, there often is a mix of large buildings, such as temples or apartments, and smaller buildings. From the air, they all look like they are the same height. As you can see from the pictures below, they can be quite different.
Sometimes looking at shadows can help you differentiate one building from another.
Also, buildings that are very tall can look like they are leaning to one side, because the satellite picture was taken at an angle. In this case it is important to map the base of the building, not the roof.
From the air it is nearly impossible to differentiate an apartment building from a big house or an office building. This why we tell mappers just to outline each building as an area and simply tag it "building." Just do your best to find the boundaries of each building. The more you map, the better you will get at seeing the edges of each building.
Buildings that are irregular in elevation, might appear as a set of houses
A row of houses may look like one big house
Some buildings have an open space in the middle which may look like a roof
To trace a building which has an open space in the middle, you need to create a "Multi-Polygon":
“Create multipolygon”: Initially make 2 polygons (outer and inner) then select both polygons, go to “Tools” and select “Create multipolygon”
Ponds (often have a temple in the middle or next to it)
- Temple: amenity=place_of_worship
- Pond: water=pond
Stupas (Buddhist temples)
OSM tags : amenity=place_of_worship
OSM tags: leisure=stadium
Common Issues in Mapping :: For all Levels
No matter which mapping editor you use, you will encounter some common issues.
Sometimes you will find a situation where all the mapping appears to be slightly off from the image. An OSM beginner might believe that the roads have been traced incorrectly and thus move the roads to what appear to be the better location.
Moving the road may be completely WRONG!
The problem more likely is the georeferencing of the image. Georeference is a term for how the imagery was set, or how closely the imagery matches the actual locations on the ground. This a relatively complex process, and the greater the terrain variation and relief, the more difficult the georeferencing. Satellites are hundreds of kilometers from the surface of the earth and, when they take flat pictures to represent the curved earth, there is bound to be some distortion and offset.
If editing with iD, when you find offsets, check with the person in charge of the particular task area. They may be able to make corrections.
(JOSM) Using imagery and dealing with offsets where there is existing data in OSM
The rest of these solutions relate to the JOSM editor. A section for the iD editor will be added soon.
Sometimes in JOSM, after downloading OSM data, adding the imagery, and zooming into the best resolution, you realize that the existing OSM data, especially roads, does not correctly overlay the imagery objects.
There is a potential that the imagery is poorly aligned in comparison to the reality in the field.
One way to check or prove that the imagery is offset is by using GPS tracks:
Click on the DOWNLOAD DATA button, then tick «Raw GPS data» near the top in the «Download» window. After downloading, an additional layer «Downloaded GPX data» will appear.
In this example, with the GPS tracks (in red) added you can see that the existing data (here: the roads) is not positioned correctly.
The imagery is actually not correctly georeferenced, and has an offset in comparison with the reality. It has to be adjusted.
To offset imagery, right-click the imagery layer or menu «Imagery», open «New offset», or use the imagery adjust button in the left toolbar.
Then drag the imagery so that it is correctly overlaid by the tracks. Click on another tool when it is over.
Now that the imagery is adjusted you can trace over it. While mapping you can hide layer «Downloaded GPX data» if it interferes with your work.
One last thing to remember: the offset might not be the same over the extent of the imagery! This is especially true in regions with a marked relief.
So when the imagery seems to be offset again, repeat the whole process.
Dealing with offsets in an area where there is no existing data in OSM
It may happen that you are the first one to OSM map an area, e.g. in remote rural areas or in developing countries.
Therefore, neither existing OSM data nor GPS tracks can be downloaded. Use existing data: If you cannot go into the field then another option is to gather other Open Database License data (ODbl).
If you can it is best to check the imagery with another image that is correctly aligned, e.g. download other Images (Tab: Imagery in JOSM main menu) as base layer and compare the different
How to trace building footprints correctly
Using either iD of JOSM you may find a situation where a tall building appears to be leaning to one side, because of the angle of the satellite photo. In this case it is important to trace the base of the building, not the top, and to make it rectangular. JOSM has a Building plug-in to help with this:
This plug-in is by far one of the most useful tools for editing (digitizing). This tool allows you to create shapes with 90 degree corners with just three clicks.
To install the plug-in: Preferences in MenuBar → Plug-ins → search for building plug-in on the list.
First, you trace the edge of your building and then you drag out the line to make it a polygon.
You can also create more complicated buildings by using the merge option. Create your building outline, select all of the polygons (press SHIFT to highlight them all) and then hit SHIFT + J to
merge the objects.
Below we see part of the building is covered by the shadow of another building. In this case you have to reference the other edges of the building and digitize accordingly.
The picture on the far right is correct.
Below we see part of the building is covered by trees. Again, use your intuition to digitize as best you can. The picture on the far right is correct.
More detailed modeling see page: Roof_modelling
How to trace roads correctly
OSM can identify where objects end and what labels these objects should have. However, it needs your help in doing so. For example, if you create a road that turns into another road without a node, then JOSM will continue labeling the road as the previous one. Therefore, it is necessary that you make all of your roads and objects as clearly as possible.
What is the actual layout of a building?
Sometimes buildings are very high or the image was taken not in exact nadir. In such cases it is important to have an idea about the actual layout of the building:
Below it is clear the shape of the shadow identifies the shape of the building. Displacements due to high rise buildings must also be taken into consideration.
Road networks are often the most-mapped features in OSM. Roads are often easy to spot from even poor quality imagery. However, it can sometimes be hard to know how to classify a roads. For suggested tags specific to Nepal, see the Nepal/Roads page.
Common OSM Tags for Natural Features and Buildings in Nepal
Below you can find a list of the most common key=values for buildings and the natural environment in Nepal (examples have been chosen where both an image from Wikimedia and aerial images can be shown, mainly from the Marsyagdi valley on the Annapurna circuit which is well-documented with tourist photos):
|building=yes|| If the building type is known use one of the more specific values, such as building=school, building=house: see building=*. |
If you aren't sure about the type of building it is, tag it as building=yes
For other man-made structures which are not buildings see man_made=*
Wikimedia commons has many other photos of buildings in Nepalese villages. Most will be from areas visited by tourists, so may be better built than in other places.
|Forests and Woods
Dense vegetation of trees (typically over 5m high)
|natural=wood||Use leaf_type=* if you know whether the forest is broad-leaved or coniferous. |
Note, the landuse=forest refers to woodland used for forestry. In remote mapping it is often not possible to ascertain this information, and therefore natural=wood more accurately reflects actual knowledge availble from the imagery.
|Ponds & lakes
Gangapurna Lake, near Manang
|natural=water; water=*||This can also be used to map the areas of large rivers|
Natural fresh watercourses larger than streams
||Sometimes it is hard to distinguish between river and stream. A useful distinction is whether it is crossable by foot or not. Anything more than 5m wide may be a river.|
Note that large rivers in mountainous terrain, such as the one illustrated, change course frequently (compare Bing and Mapbox imagery for this location). It can be useful to indicate the full extent of the riverbed. natural=shingle, which appears in the standard OSM render, can be used to map the areas of the river bed covered by river shingle.
Smaller water flow which can be easily crossed
Principally areas of land used for growing crops, usually terraced in hills and mountains
|landuse=farmland|| Mapping farmland is very useful when aerial images are too poor to readily pick out villages and hamlets. Building up the pattern of farming will often help both identify likely residential areas and roads and tracks between them. Even without details of residential areas, some kind of proxy for number of inhabitants can be derived from the area under cultivation.|
In areas with good quality imagery it is not necessary to map farmland.
For features where no suitable preset can be found.
|name=* if known, description=* describe the feature, fixme=* use a standard phrase, such as "fix tagging" to facilitate search|
Writing of nepali names in english
* गाउँ - Village - gaũ e.g. Munsigaũ * डाँडा - Hill - dada e.g. Lamidada * सडक - street - sadak * खोला - river - khola * गोरेटो - path or small footway in mountains- goreto * वन - forest - ban