Proposal:Fire Hydrant Extensions (part 3)
(Redirected from Proposed features/Fire Hydrant Extensions (part 3))
Jump to navigation
Jump to search
| Fire Hydrant Tagging Extensions (part 3) | |
|---|---|
| Proposal status: | Abandoned (inactive) |
| Proposed by: | Viking81 |
| Tagging: | emergency=fire_hydrant |
| Applies to: | 
|
| Definition: | additional information for emergency=fire_hydrant |
| Statistics: |
|
| Draft started: | 2017-09-16 |
| RFC start: | 2017-12-17 |
| Vote start: | - |
| Vote end: | - |
Rationale
This is a split of original Fire Hydrant Extensions. The aim is to let the original proposal go to vote with the unanimously approved tags and to continue here the discussion of other tags.
New Tagging
Here is the new proposed tagging for a fire hydrant, for numeric values with units, see the guidelines: Map Features/Units
| Tag | Description | Valid values |
|---|---|---|
| min_suction_head=* | Used together with pressure=suction when water level in the pond/stream/tank/pool is high and its distance from ground level is to the minimum. | # in meters |
| max_suction_head=* | Used together with pressure=suction when water level in the pond/stream/tank/pool is low and its distance from ground level is to the maximum. | # in meters |
| operational_status:date=* | Date of the last functional check (this tag is not specific to fire hydrants). It is useful to differentiate between hydrants certainly working and hydrants whose functionality is not known. | yyyy-mm-dd |
| wrench=* | Type of wrench needed to open the hydrant. | see below for reference |
| cap:wrench=* | Type of wrench needed to open the hydrant caps. In many cases it is different from the wrench used to open the hydrant itself. | see below for reference |
| pump=* | Used for hydrants connected to fire water wells when there is an integrated pump (this tag is not specific to fire hydrants). | yes |
| pump:type=* | Type of the pump, to be uesed together with pump=* (this tag is not specific to fire hydrants). | bilge_pump, electric_pump |
Adding wrench=* and cap:wrench=*
| Value | Description |
|---|---|
| hand | No wrench needed, you can use your hands |
| pentagonal | A wrench with pentagonal footprint |
| squared | A wrench with squared footprint |
| triangular | A wrench with triangular footprint |
| linear | A wrench with linear or rectangle footprint |
| allen | Allen wrench (or hex key) |
| pin_spanner | Pin spanner |
| hook_spanner | Hook spanner |
| key | The hydrant is locked with a key needed to open it |
This list can be extended as needed by mappers if they find a different type of lock for hydrants. Use semicolon separated values if more than one wrench type is needed. (e.g. wrench=pentagonal;squared or wrench=key;pentagonal)