Data collection on site using a computer

From OpenStreetMap Wiki
Jump to: navigation, search
Available languages — Data collection on site using a computer
· Afrikaans · Alemannisch · aragonés · asturianu · azərbaycanca · Bahasa Indonesia · Bahasa Melayu · Bân-lâm-gú · Basa Jawa · Baso Minangkabau · bosanski · brezhoneg · català · čeština · dansk · Deutsch · eesti · English · español · Esperanto · estremeñu · euskara · français · Frysk · Gaeilge · Gàidhlig · galego · Hausa · hrvatski · Igbo · interlingua · Interlingue · isiXhosa · isiZulu · íslenska · italiano · Kiswahili · Kreyòl ayisyen · kréyòl gwadloupéyen · Kurdî · latviešu · Lëtzebuergesch · lietuvių · magyar · Malagasy · Malti · Nederlands · Nedersaksies · norsk bokmål · norsk nynorsk · occitan · Oromoo · oʻzbekcha/ўзбекча · Plattdüütsch · polski · português · português do Brasil · română · shqip · slovenčina · slovenščina · Soomaaliga · suomi · svenska · Tiếng Việt · Türkçe · Vahcuengh · vèneto · Wolof · Yorùbá · Zazaki · српски / srpski · беларуская · български · қазақша · македонски · монгол · русский · тоҷикӣ · українська · Ελληνικά · Հայերեն · ქართული · नेपाली · मराठी · हिन्दी · অসমীয়া · বাংলা · ਪੰਜਾਬੀ · ગુજરાતી · ଓଡ଼ିଆ · தமிழ் · తెలుగు · ಕನ್ನಡ · മലയാളം · සිංහල · ไทย · မြန်မာဘာသာ · ລາວ · ភាសាខ្មែរ · ⵜⴰⵎⴰⵣⵉⵖⵜ · አማርኛ · 한국어 · 日本語 · 中文(简体)‎ · 吴语 · 粵語 · 中文(繁體)‎ · ייִדיש · עברית · اردو · العربية · پښتو · سنڌي · فارسی · ދިވެހިބަސް
Mapping a bench on site

Computer + satnav receiver = on-site editor. Combine a simple computer with a satellite receiver and what you get, is an OSM editor, where you can see and edit OSM, while you are on site.

Tips

  • Computer (or a device that lets you to edit OpenStreetMap data while you are on site)
    • Your phone may work (but status of JOSM on mobile devices is unknown, try other mobile editors)
      • If you are lucky to have Wi-Fi with connection to Internet, you can use online editors
    • Netbook
  • In general, electronic paper devices and related software (including Notes by Apple or Evernote or others) will not work since you cannot edit OpenStreetMap data with them; they are just very fancy and advanced version of paper and pencil or preprinted maps.
    • This statement may change in the future! Hopefully someone will take advantage of free idea given to them; but you can speed up this process by directly asking them to support OpenStreetMap ;-)

Pros

  • you can avoid intermediate storage
  • you get benefits of knowing estimate your current position
  • you have an option to inspect any object on site
  • you can avoid processing of satnav trace
    • filtering, editing, uploading, managing
  • you don't need any notes, just edit data and add details
    • you don't need to sync your notes (text, audio, video) with satnav trace
  • Time
    • You save your site by not using intermediate storage (notes)
  • Same(?) cost-efficiency as using your own memory

Cons

  • If you leave site, you cannot add further details. You have to revisit area again.
  • You cannot go back and resolve ambiguities you did not note down with sufficient precision

Prerequisites

Connect the GPS receiver with the netbook

You can either connect your GPS connector via USB or via bluetooth. Set up and test your connection, while you are still at home.

Install JOSM

Install JOSM on your netbook. You will need the LiveGPS plugin to show your current position. I also recommend SlippyMap to select the region to download and WMS Plugin to display satellite imagery. Again, connect with your GPS receiver and check everything works, esp. the LiveGPS plugin should now be able to center on your current position. When using the WMS Plugins, you probably have to start JOSM with some extra memory, e.g.
java -Xmx1024M -jar ~/software/josm-tested.jar

On a linux system, you may want to write a little script to connect to your GPS device and wrap all the little parameters, so all you have to do on site, is type a single command.

Mapping/Edit cycle

Preparation

As with any other useful approach, you start with some preparations.

Common preparations

Before you go on any mapping trip, you plan where to go and what you expect to map. As always, it is a good idea to check what is already present in OSM and which unresolved issues exist within that area.

Prepare the area with satellite imagery

Optionally, you can pre-edit the area using areal imagery. The most useful features are clearly the roads, as they give you a basic structure for your mapping trip. Depending on your level of detail, this can save you from going down each and every road.

You can already draw clearly distinguishable features, such as roads, buildings, tennis grounds. Notice any unclear and unmapped features. When you go on site, you fill in the unknowns.

This preparation will not only save you time on-site, it gives you an orientation and a feeling for the area you are going to survey.

Prepare your netbook

After you have roughly selected your area, you download your data in JOSM (the Slippymap is handy here). Save the layer, so you can load it later; check, if the file is loadable.

Optionally, you can download satellite imagery using the WMS plugin.

  • Eventually, zoom in on your map to get images with a higher resolution.
  • Open a new WMS layer by clicking on WMS-> Yahoo Sat, this should load images for the current view.
  • Zoom out, until you see the entire area, where you want to go mapping.
  • Save the WMS layer to a file; check, if the file is loadable. You can use this layer in subsequent visits to that area.

Charge your netbook and your GPS device.

On Site

Netbook on site, running JOSM

Get your bearings

First, you should figure out, what's right and what's left. Turn on track recording from the LiveGPS plugin and walk a couple of steps along some road. This should give you a good idea of what road you're on.

Edit the map

When you're on site, you enter what you see into JOSM. Orientate yourself on the features already present. The presets in JOSM are useful here to fill in the data. When you come across a feature you want to map, but don't know the tag by heart, enter it as a FIXME, note suitable properties and correct the tag later.

Editing with JOSM in your hand is a two-way process. If a feature is present in OSM, check if it really is there (an intersection may have become be a round-about) and if it's properties are correct (e.g. if the street name is spelled correctly).

Hints

  • While you draw, turn of "automatically center on your position", otherwise, the map may move underneath your cursor.
  • Save your data layer often.
  • If you're netbook has a mobile internet connection, you can look up features and tags, but watch your costs, when downloading large sets of images.

Post-processing

Yes, there usually still remains some work to do, when you are back online. As you already inserted all information in the editor, the post-processing is pretty simple.

  • Of course, you want to upload your data.
  • Resolve any conflicting changes
  • Fix all the FIXMEs you created, while you were out there.

A word about the hardware

Netbooks in general

Although this approach is technically possible with any hardware, where JOSM runs on, a netbook is currently the best companion for an OSM mapper.

  • lightwight
  • you can hold them in one hand and type with the other (try this with a notebook, unless you are Arnold Schwarzenegger)
  • runs software available for PC (esp. JOSM)
  • cheap (mine is available for 150 Euro)
  • and you can run navit using OpenStreetMaps for navigation

Recommendations

From my experience, there are some issues you should consider, when buying a netbook for mapping, mainly ergonomic ones:

  • the display should be readable in bright sunlight
  • the display should not show reflections, you want to see the editor, not yourself (so-called "glare-type-displays")
  • touchpad should be precise (mine isn't, and I have to fumble around when drawing)
  • time on battery (mine runs about 3 hours; plenty time to let my arms go numb)
  • hard-disk vs. flash-memory: flash-memory is less sensitive, should you drop your netbook

I described my own hardware on my user profile.

See also