Key:sett:length
Jump to navigation
Jump to search
 sett:length
|
 |
| Description |
|---|
| Describes the length of individual sett stones (hewn stone paving blocks), usually in meters or centimeters. |
| Used on these elements |
    |
| Useful combination |
|
| See also |
| Status: in use |
| Tools for this tag |
|
Description
The key sett:length=* is used to specify the length of individual sett stones, i.e., the size of the hewn stone blocks used for paving (such as in historic streets or plazas).
Values should be given as a numeric value representing the length of one stone, typically in meters (default) or with an explicit unit such as cm.
Example values
sett:length=0.05– small mosaic paving (≈ 5 cm)sett:length=0.1– small stone paving (≈ 10 cm)sett:length=0.15– large stone paving (≈ 15 cm)
Units
If no unit is provided, meters are assumed (e.g. `sett:length=0.1` means 0.1 m = 10 cm). You can optionally specify a unit such as `sett:length=10 cm` to avoid ambiguity.
Size examples
-
sett:length=0.15large stone paving (from about 15 cm) -
sett:length=0.1small stone paving (stone size around 10 cm) -
sett:length=0.05mosaic paving (stone size around 5 cm)
See also
surface=sett– describes the type of surfacepaving_stones:length=*– equivalent key forsurface=paving_stonespaving_stones:width=*