This plugin allows to load pictures and display them as JOSM layer.
Quick animated how-to: Piclayer Usage
- 1 General information
- 2 Installation
- 3 Usage
- 4 History
- 5 Other links
- 6 Annexes
- supported formats : PNG, JPEG, GIF
- Easy calibration by moving/rotating/scaling the picture with the mouse
- Loading/saving of the pictures calibration in separate files with .cal extension
- No support for (Geo)TIFF
- No georeferencing based on reference points or coordinates (only positioning with the mouse)
- .cal files are projection-specific (.cal files are specific to the JOSM projection that existed when .cal file was saved. If you change JOSM projection, you should save the .cal file again, otherwise the pic will not load in its position next time.)
- Not a full blown orthorectification system (the process of removing the effects of image perspective (tilt) and relief (terrain) effects for the purpose of creating a planimetrically correct image.)
Use the plugin panel in the preferences of JOSM to install this plugin.
|This article or section may contain out-of-date information. The information is no longer correct, or no longer has relevance.
If you know about the current state of affairs, please help keep everyone informed by updating this information. (Discussion)
Loading a picture
- Load some data from the server so that map is visible. E.g., "File >> Download Data"
- (Experience shows that one should now be sure to zoom to the approximate future center of the image you plan to geo-reference. For instance, if you have a picture of a 1 kilometer area, before loading it first zoom in so you are looking at just a 100 meter area. If you don't know the approximate center location, then you can still try your luck...)
- select the menu "Imagery >> More... >> New Picture Layer from File"
- select one or several files
If calibration files (.cal) are available, then will be loaded automatically. If not, the image center will be placed at the current center of the screen, at a scale where it's reasonably visible.
- New way (see animation at Piclayer Usage)
- Activate the layer.
- (Tip: At this point be sure to use the buttons on the left panel to first drag, and rotate, and resize (of course always keeping the aspect ratio constant), to loosely match up with the base map before ever touching your first green arrow. -- Do not attempt to fully rotate an upside down picture merely by grabbing points 1, 2, and 3...)
- Click green arrow button at the left toolbar
- Select picture checkpoints (3 checkpoints needed for processing)
- Click red arrow button at the left toolbar
- At this mode you can move checkpoints (you should point exactly in the bubble of the point) and image will transform. Note one can at any time reposition points 1, 2, and 3, by just clicking the green arrow again.
- Old way
- Activate the layer (not only select, really activate, this is important)
- Click on the appropriate icon "Drag to ... the picture" in the toolbar
- Use the mouse. You can press SHIFT while rotating or scaling the picture for a better precision.
Saving the cal file
Right click on a layer, "Save picture calibration..."
Calibration files are saved in the same directory where the image was loaded from.
Loading the cal file
It will be loaded automatically when loading the picture based on the file name (picture.png.cal for instance). You can also load a cal file manually with "Load picture calibration..."
Important: the cal file is projection specific, make sure you use the same projection when saving and loading
Loading previous images
Just load them as you would new images that you haven't georeferenced yet. If New Picture Layer from File is greyed out in the menu, then first load some area. 
- JAR file: https://svn.openstreetmap.org/applications/editors/josm/dist/
- Code: https://svn.openstreetmap.org/applications/editors/josm/plugins/piclayer
- Open tickets in trac
New .cal file format
The following example uses UTM35 projection aka EPSG:32635, POSITION_X=28.8652921°E POSITION_Y=60.4985131°N and Image_Resolution~=0.5 m/pix
#JOSM PicLayer plugin calibration data #Sun Nov 27 22:21:58 CET 2011 POSITION_Y=6708383.375731533 POSITION_X=602463.1049788792 INITIAL_SCALE=673.3630407396365 M12=-714.691403694874 M11=0.508636037014039 M10=6.263463862108147E-5 M02=43.42632371753174 M01=-2.1720970442278513E-4 M00=0.5060984647587284
- POSITION_X and POSITION_Y: position of the image center in world units (i.e. projection specific) — the same as in old .cal format
- INITIAL_SCALE: equivalence of 100 pixels in world units
- M00, M01, M02 and M10, M11, M12: affine transform coefficients
(PX,PY)=POSITION_X/Y, S=INITIAL_SCALE, (x,y)=pixel location relative to the image center. (x',y')=projected coordinates. IGN=ignore. Technically, INITIAL_SCALE and POSITION_X, POSITION_Y are redundant because they could be merged into M. Also see http://en.wikipedia.org/wiki/File:2D_affine_transformation_matrix.svg for a graphic help on how M is constituted.
Old .cal file format
#JOSM PicLayer plugin calibration data #Mon Nov 15 19:38:35 CET 2010 SCALEX=1.0 SCALEY=1.0 SHEARX=0.0 SHEARY=0.0 INITIAL_SCALE=190.92609423045016 POSITION_Y=292616.03696207993 POSITION_X=490266.6137017577 INITIAL_POS_y=293088.4061731008 INITIAL_POS_X=490909.1888228225 ANGLE=58.77
- INITIAL_SCALE: world meters / 100 pixels at the time you load the image
- SCALE_X/Y: additional scaling done by the user
- SHEAR_X/Y: meaning?
- INITIAL_POS_X/Y: meaning?
- POSITION_X/Y: position of the image center in world units
- ANGLE: 0 means not rotated
About scaling: the size of the image in world meters is: imgsize / 100 * INITIAL_SCALE * SCALE_X/Y
Remember that the cal files are projection specific, but the projection is not stored in the file.
Note: Josm may crash when trying to open a very old cal-file (see ticket 6123 with workaround)
How to convert an old .cal file format to new .cal file format
See the scripts on the German version of this page.
If a world file is present next to an image when opened, it is used to automatically georeference the layer.