Template:Prioritisation/doc

From OpenStreetMap Wiki
Jump to navigation Jump to search

Usage

Static slide bars. To indicate priorities, but also units of measure like length, temperature etc... Has multi-language support automatically from the calling page.

Each bar has 5 point markers on the unit bar, thus 4 sections which can be configured in width and colours. The slider changes colour according it's position in 5 different colours, matching the configurable colour range of the bar.

Example

A slide bar with red palette, including a label and unit bar.

Red slidebar with slider at 75%. Defined units.

Workgroup Priority
Low
Medium
High


→ {{Prioritisation|label=yes|type=WorkgrouptestPriority|width=3|unitbar=yes|lcolor=red|mcolor=red|hcolor=red|position=0.75|unit1=Low|unit2=|unit3=Medium|unit4=|unit5=High}}

Green red slidebar for temperature with slider at 30%. Defined units and scaled to 75%.

Temperature
0°C
10°C
20°C
30°C
40°C


→ {{Prioritisation|label=yes|type=Temperature|width=5|vscale=0.75|unitbar=yes|lcolor=green|mcolor=green|hcolor=red|position=0.3|unit1=0°C|unit2=10°C|unit3=20°C|unit4=30°C|unit5=40°C}}

Bare blue slidebar with slider at 100%.

 


→ {{Prioritisation|label=yes|type=Workgroup {{Prioritisation|label=|width=3|unitbar=|lcolor=blue|mcolor=blue|hcolor=blue|position=1|unit1=|unit2=|unit3=|unit4=|unit5=}}

Templatedata

Creates a static but highly configurable slide bar.

Template parameters

ParameterDescriptionTypeStatus
Label displayed ?label

Label for the slide bar. Describes what the slide bar represents. May be any formatted text and include images.

Default
yes
Booleanoptional
Type of data in the bartype

Describes the type of data in the bar. Currently implemented types (multi-lingual) are: Priority, Temperature, Length, Height, Distance.

Default
Priority
Stringsuggested
Width of a bar sectionwidth

Width of a bar section. Use this parameter to adjust the with of the bar, f.i. to accommodate wide unit descriptions.

Default
5
Numbersuggested
Scalevscale

Scaling of the whole bar. To scale down use fractions, to scale up number above 1.

Default
1
Numbersuggested
Display unit bar divisionsunitbar

Displays the unit bar markers (always 5) under the slide bar

Default
No
Booleanoptional
Low range colour palettelcolor

Selection of one of the 3 predefined colour palettes for the lower range. Pre-defined colour palettes include: red, green and blue.

Default
red
Stringoptional
Medium range colour palettemcolor

Selection of one of the 3 predefined colour palettes for the medium range.Pre-defined colour palettes include: red, green and blue

Default
red
Stringoptional
High range colour palettehcolor

Selection of one of the 3 predefined colour palettes for the high range.Pre-defined colour palettes include: red, green and blue

Default
red
Stringoptional
Position of the sliderposition

Fraction to fix the position of the slider: 0 < x < 1. Slider will adopt colour from the nderlying slide bar configured colour.

Default
0
Numbersuggested
Label for the first unit markerunit1

Use this parameter to define a a label (with units of measurement) for the first marker on the unit bar. To display no text enter a space.

Default
0
Stringoptional
Label for the second unit markerunit2

Use this parameter to define a a label (with units of measurement) for the second marker on the unit bar. To display no text enter a space.

Default
Stringoptional
Label for the third unit markerunit3

Use this parameter to define a a label (with units of measurement) for the third marker on the unit bar. To display no text enter a space.

Default
5
Stringoptional
Label for the fourth unit markerunit4

Use this parameter to define a a label (with units of measurement) for the fourth marker on the unit bar. To display no text enter a space ' '.

Default
Stringoptional
Label for the fifth unit markerunit5

Use this parameter to define a a label (with units of measurement) for the fifth marker on the unit bar. To display no text enter a space.

Default
Stringoptional

See also