Key:railway:electricity

From OpenStreetMap Wiki
Jump to navigation Jump to search
railway:electricity
Description
Feeding point or section point of electric traction energy attached to (rail) infrastructure. Show/edit corresponding data item.
Group: power,railway
Used on these elements
may be used on nodesshould not be used on waysshould not be used on areasshould not be used on relations (except multipolygon relations)
Documented values: 2
Status: in use

Electric railways are widely spread around the globe. These vehicles are powered by overhead lines, supported by power=catenary_mast, or third rails (see: electrified=* ). Under this key (railway:electricity) the feeding points for the energy and seperation points can be tagged. Mostly there is also a switch or man_made=street_cabinet nearby.

How to map

Tagging section point

Key Value Comment Recommendation
railway:electricity joint Section point, seperating two section of overhead line or (electric) third rail from eachother. Mostly close to a power=catenary_mast, but can also be placed in the middle between two of them. Mandatory
railway:electricity:jumpering possible, no,
closed, bridged
Switch status or possibilities for this switch. Recommended
railway:electricity:ref <ref> Unique value, which you would normally put in ref=*, for this point. Visable on a sign at this point. Recommended
railway:electricity:name <name> Sometimes there is an additional name=*. Use only, if value for ref is already used for a unique value. Optional
operator
operator:wikidata
<switch operator> The name of the company which operates this infrastructure Optional

Tagging feeding point

Key Value Comment Recommendation
railway:electricity power_supply Feeding point for electric energy into third (electric) rail or overhead line. Mostly close to a power=catenary_mast. Not to be confused with railway=power_supply providing a power plug for electric devices. Mandatory
voltage <operating voltage> The voltage this point supplies Recommended
railway:electricity:ref <ref> Unique value (for this operator), which you would put normally in ref=*, for this point. Visable on a sign at this point. Recommended
railway:electricity:name <name> Sometimes there is an additional name=*. Use only, if value for ref is already used for a unique value. Optional
operator
operator:wikidata
<switch operator> The name of the company which operates this infrastructure Optional