|Feature : Hiking|
|About tagging of ways, points, areas and relations related to hiking.|
This page is concerned with tagging of ways, points, areas and relations related to hiking.
- 1 Tagging ways, points and areas
- 2 Tagging walking and hiking Route Networks
- 3 Mapping Projects
- 4 See Also
Tagging ways, points and areas
|| Preferably used for a hiking path.
Follow the photo guide for help with tagging.
||For designated footpaths, i.e. mainly/exclusively for pedestrians.|
||Rough roads normally used for agricultural or forestry uses etc. Use tracktype=* to describe the surface.|
|ford||yes||The way crosses through stream or river.|
Attributes of ways
|surface (optional)|| asphalt
|The surface of the trail.|
|sac_scale (optional)|| hiking
|A difficulty rating scheme for hiking trails.|
|trail_visibility (optional)|| excellent
||This key describes attributes regarding trail visibility and orientation.|
|incline (optional)|| value%
||For marking a way's incline (or steepness/slope).|
|tracktype (optional)|| grade1
| Paved track
surface of gravel or densely packed dirt/sand
an even mixture of hard and soft materials
prominently dirt/sand/grass, but with some hard materials
only grass, sand and/or soil
||Way segment with various safety measures|
|ladder (optional)||yes / length in m||
||Way segment with a ladder as safety measure|
|safety_rope (optional)||yes / length in m||
||Way segment with a chain or rope as safety measure|
||An alpine hut is a remote building located in the mountains intended to provide board and lodging. It is managed during the opening period.|
||A wilderness hut is a remote building with fireplace intended to provide shelter and sleeping accommodation.|
||A small shelter against bad weather conditions. To additionally describe the kind of shelter use shelter_type=*.|
||A basic hut is a remote building intended to provide basic shelter and sleeping accommodation.|
||A lean-to is a shed with typically three walls located in the countryside intended to provide shelter.|
||Structure on picnic sites to protect from rain. Normally open to all sides.|
||Shallow cave-like opening at the base of a bluff or cliff.|
||Backcountry camping without facilities. The access is usually restricted to foot, bicycle, canoe or ski. Set backcountry=yes.|
||Information resource for tourists and visitors. To additionally describe the kind of information use information=*.|
||A board with information.|
||A board with a map.|
See also Relation:destination sign
||Parking place. Often found at trailheads.|
||A place where you can have an outdoor picnic. Optional: fireplace=yes. See also fire pit: leisure=firepit|
||An entrance that can be opened or closed to get through the barrier.|
||Checkpoint for hiking.|
||An artificial pile of stones, often in a conical form. It is used by hikers, villagers, pilgrims, etc. as a mark to show the way, a border, or peak of mountain.|
||Shop focused on selling camping, walking, climbing, and other outdoor sports equipment (GPSes, etc.)|
|safety_rope||yes/length in m||
||a chain or rope as safety measure on the trail|
|ladder||yes/length in m||
||a ladder as safety measure on the trail|
||rungs, stemples or pins as safety measure on the trail|
|| Top of a hill or mountain (summit)
add: name=* ele=*
||A volcano, either dormant, extinct or active|
|| The lowest point along a ridge or between two mountain tops.
add: name=* ele=*
|| The highest point of a mountain pass.
add, if node is not identical to natural=saddle: name=* ele=*
||A mountain or hill ridge|
||A thin, almost knife-like, ridge of rock which is typically formed when two glaciers erode parallel U-shaped valleys|
||A place with a good view of surrounding countryside.|
||A source of drinking water.|
||A point where water flows to the surface of the earth from underground naturally.|
|seasonal||yes, no, spring, summer, autumn, winter, wet_season, dry_season||Useful for natural features which appear or disappear with differing seasonal conditions.|
||For an unpopulated named place.|
||The common default name.|
||Elevation above sea level in metres.|
Tagging walking and hiking Route Networks
A route is a customary or regular line of travel, often pre-determined and publicised. It consist of paths taken repeatedly by various people.
To tag a hiking route you create a relation with the appropriate tags and add all elements (points and ways) of the hiking route to this relation.
See also Relation:route.
Tags of the relation
|type||route||This relation represents a route.|
|route||hiking|| route=foot is used for routes which are walking and/or do not match "hiking" (WP's definition of hiking: "a long, vigorous walk, usually on trails, in the countryside").|
Don't use route=pilgrimage (almost non-existent) but add pilgrimage=yes to a hiking-route.
|name||a name||The route is known by this name (e.g., "Westweg")|
| International walking network: long distance paths that cross several countries
National walking network: long distance paths
Regional walking network: used for walking routes that cross regions
Local walking network: used for small local walking routes
|symbol||symbol description||Describes the symbol that is used to mark the way along the route, e.g., "Red cross on white ground" for the "Frankenweg" in Franconia, Germany|
|osmc:symbol||*||(optional) Some renderer uses the osmc:symbol=* to indicate a route on the map.|
|name:xy||localised name||where xy is the iso language code|
|ref||a reference||The route is known by this reference (e.g. "E1")|
|operator||operator name||The route is operated by this authority/company etc. e.g. "Schwarzwaldverein", "Alpenverein"|
|state||proposed / alternate / temporary||Sometimes routes may not be permanent or may be in a proposed state.|
|description||a short description||What is special about this route|
|colour||a hex triplet||(optional) Colour code noted in hex triplet format. Especially useful for public transport routes. Example: "#008080" for teal colour|
|distance||distance||(optional) The distance covered by this route, if known. For information of users and automatic evaluation e.g. of completeness. Given including a unit and with a dot for decimals. (e.g. "12.5" in km)|
|ascent||ascent||(optional) The ascent covered by a route in meters. If a route has start and end point at different altitude use descent too|
|descent||descent||(optional) The descent covered by a route in meters. Use it only if it differs from the ascent (different altitude at start/endpoint of a route).|
|roundtrip||yes/no||(optional) Use roundtrip=no to indicate that a route goes from A to B and instead of being circular (roundtrip=yes).|
|oneway||yes/no||(optional) Use oneway=yes to indicate that the route is to be walked in only one direction, according to the signposts on the ground|
|website||*||(optional) website that describes the route|
|wikipedia||language:page title||(optional) wikipedia page that describes the route|
Hiking routes are rendered for selected areas in Germany in a Hiking and Trail riding map (german). The tags required for rendering are:
- name=* Meaningful route name suitable for identifying this route.
- symbol=* Verbal description of the route marker symbols.
- osmc:symbol=* Coded description of the route marker symbols.
Since the tagging is generic, it is up to each country to decide how to map the hiking networks that exist in their country onto the hierarchy of national/regional/local. For countries with no specific local/regional/national "walking network", it may be helpful to consider whether different trails are managed or funded by government bodies at different levels.
See also Walking Routes.
Hiking trails that cross or touch normal roads should be connected to the road ways on the map. This will allow mixed routing applications to be built on OSM.
Relief Mapping Projects
- Hiking Map gather feature ideas for a new OSM Slippy map layer especially for hikers
- Shaded relief maps using mapnik Documentation about rendering a topographical map
- Relief maps Overwiew
- Hillshading with Mapnik Howto
- OpenAndroMaps - mostly Android, desktop viewer available
- haihui - offline hiking maps in the browser
- Trekarta - offline maps for Android with hiking mode that visualizes trail difficulty, visibility, OSMC symbols and hiking routes.
Maps for Garmin-devices
- OSM_Map_On_Garmin/Download Here are maps in Garmin image file format people have created from OSM data.
- 4UMaps.eu Outdoor maps for Mountainbiking and Hiking. Support the SAC hiking tags as well as track attributes. Additionally it has elevation lines, hill shading, accommodation etc.
- OSMC Wanderreitkarte shows OSM with contour lines and hill shading and hiking routes (Europe only)
- WayMarked Trails (ex-Lonvia's Weltwanderkarte) shows OSM with hill shading and hiking routes, among other interesting layers like MTB and rollerblades.
- Hikebikemap shows OSM with contour lines and hiking and biking routes
- Cyclemap shows OSM with contour lines and biking routes
- WORLD OSM WMS shows OSM with hill shading for Europe
- Hiking/openhikingmap shows OSM with contour lines and hill shading
- Relief maps
- US National Park Service Tagging
- Proposed features/trailhead
- Proposed relation: Region Topographical use: mountain range / massive / mountain/ valleys
- Proposed features/trailblazed
- Route altitude profiles SRTM Create an altitude profile for routes based on the freely available NASA SRTM3 altitude data.
- OpenTrail OpenTrail aims to be an OSM-based Android app for UK hiking/walking.
- Managing waypoints with OSM Extract waypoints from OSM database.
-  Making Your Own Hiking Maps With Kosmos.
- hikingbook.pl This program will create hiking books out of osm files.
- UK Leisure Map A ruleset for Maperitive showing relevant features and UK public rights of way
- GB Leisure Carto A CartoCSS style and Python script for creating maps which use the OSGB projection and grid