Converting to WGS84

Từ OpenStreetMap Wiki
(đổi hướng từ WGS 84)
Bước tới: chuyển hướng, tìm kiếm
Available languages — Converting to WGS84
Afrikaans Alemannisch aragonés asturianu azərbaycanca Bahasa Indonesia Bahasa Melayu Bân-lâm-gú Basa Jawa Baso Minangkabau bosanski brezhoneg català čeština dansk Deutsch eesti English español Esperanto estremeñu euskara français Frysk Gaeilge Gàidhlig galego Hausa hrvatski Igbo interlingua Interlingue isiXhosa isiZulu íslenska italiano Kiswahili Kreyòl ayisyen kréyòl gwadloupéyen kurdî latviešu Lëtzebuergesch lietuvių magyar Malagasy Malti Nederlands Nedersaksies norsk norsk nynorsk occitan Oromoo oʻzbekcha/ўзбекча Plattdüütsch polski português română shqip slovenčina slovenščina Soomaaliga suomi svenska Tiếng Việt Türkçe Vahcuengh vèneto Wolof Yorùbá Zazaki српски / srpski беларуская български қазақша македонски монгол русский тоҷикӣ українська Ελληνικά Հայերեն ქართული नेपाली मराठी हिन्दी অসমীয়া বাংলা ਪੰਜਾਬੀ ગુજરાતી ଓଡ଼ିଆ தமிழ் తెలుగు ಕನ್ನಡ മലയാളം සිංහල ไทย မြန်မာဘာသာ ລາວ ភាសាខ្មែរ ⵜⴰⵎⴰⵣⵉⵖⵜ አማርኛ 한국어 日本語 中文(简体)‎ 吴语 粵語 中文(繁體)‎ ייִדיש עברית اردو العربية پښتو سنڌي فارسی ދިވެހިބަސް

OpenStreetMap uses the WGS-84 coordinate system, as do most GPS units. However, many other coordinate systems also exist and are in widespread use, depending on the region and application. Every country tends to use its own standard or preferred coordinate system; so that the maps for that region are as undistorted as possible and the coordinates are reasonably simple to use. These coordinates need to be converted to WGS-84 before being used in OSM.

Conversion tools

Potlatch 2 and JOSM

The map editors, Potlatch 2 and JOSM (via the OpenData plugin), are both technically able to convert between coordinate systems, however the number supported is very limited. In Potlatch use Background->Vector File..., and in JOSM File->Open.


Proj is a library and command-line tool for Linux and Unix systems. It is available at , and is included in many Linux distributions.


Geotrans is an open-source GUI and command-line tool which can be used to convert between most coordinate systems. It is available for Windows and Linux, at . It is also included in some Linux distributions as the geotranz package.


QGIS is a free GIS application that can be used to convert between Coordinate Reference Systems (CRS) in two simple steps. First, open the input data making sure to select the correct CRS. Finally, use Layer->Save As... to export the layer with a different CRS (you may choice between the 'Project CRS' or select a CRS from QGIS's extensive list).

Online services

There are several online services for converting coordinates.

Regional systems

In JOSM, you can use the following projection parameters by setting up a custom projection in Preferences → Map Settings → Map Projection. You can then input projected coordinates by changing to the East/North tab in the Add Node or in the Move Node dialog.


Converting to and from BMN using proj.4 on meridian strips

M28: +proj=tmerc +lat_0=0 +lon_0=10d20 +k=1 +x_0=150000 +y_0=-5000000 +ellps=bessel
M31: +proj=tmerc +lat_0=0 +lon_0=13d20 +k=1 +x_0=450000 +y_0=-5000000 +ellps=bessel
M34: +proj=tmerc +lat_0=0 +lon_0=16d20 +k=1 +x_0=750000 +y_0=-5000000 +ellps=bessel

In order to convert between WGS84 and MGI add

+ellps=bessel +towgs84=577.326,90.129,463.919,5.137,1.474,5.297,2.4232

You cannot use "proj" directly but have to use "cs2cs" instead. Only this "allows translation between any pair of definable coordinate systems, including support for datum translation" (from the man-page of proj).

An example for M28 looks like this:

 cs2cs +proj=tmerc +lat_0=0 +lon_0=10d20 +k=1 +x_0=150000 +y_0=-5000000 +ellps=bessel \
          +towgs84=577.326,90.129,463.919,5.137,1.474,5.297,2.4232 \
       +to \
       +proj=longlat +ellps=WGS84 +datum=WGS84


There are two projection systems used in Belgium : Lambert 72 and Lambert 2008.

Lambert 72: +proj=lcc +lat_1=51.16666723333333 +lat_2=49.8333339 +lat_0=90 +lon_0=4.367486666666666 +x_0=150000.013 +y_0=5400088.438 +ellps=intl +towgs84=-99.059,53.322,-112.486,0.419,-0.830,1.885,-1

Lambert 2008: +proj=lcc +lat_1=51.16666723333333 +lat_2=49.8333339 +lat_0=90 +lon_0=4.367486666666666 +x_0=150000.013 +y_0=5400088.438 +ellps=intl +towgs84=-106.8686,52.2978,-103.7329,-0.3366,0.457,-1.8422,-1.2747 +units=m +no_def


Many systems have been used at the national level by IBGE. For a full, detailed list with projection parameters, see Brazilian Coordinate Reference Systems in OSGeo's wiki.

  • Rio Grande do Sul: UTM 22 or 21, South hemisphere
    • Porto Alegre: municipal decree 18.315 defines the TM-POA projection as: +proj=tmerc +lon_0=-51 +k=0.999995 +x_0=300000 +y_0=5000000 +lat_0=0 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs


There are several projection systems used in France, depending on the use (just one zone, or the whole of Metropolitan France, which is Zone II étendu) and the current standards (subject to change ... yes, it's a mess...). The IGN detailed it. Here are the EPSG codes for Metropolitan France :

  • Lambert Zone I = (ESPG:"Lambert Nord") code EPSG:27561
  • Lambert Zone II = (ESPG:"Lambert Centre") code EPSG:27562
  • Lambert Zone III = (ESPG:"Lambert Sud") code EPSG:27563
  • Lambert Zone IV = (ESPG:"Lambert Corse") code EPSG:27564
  • Lambert I Carto = (ESPG:"Lambert zone I") code EPSG:27571
  • Lambert II Carto/étendu = (ESPG:"Lambert zone II étendu") code EPSG:27572
  • Lambert III Carto = (ESPG:"Lambert zone III") code EPSG:27573
  • Lambert IV Carto = (ESPG:"Lambert zone IV") code EPSG:27574

Great Britain

Converting to and from OS Grid (OSGB), using the proj tool:


See for the calculations behind this.


Coordinates used in Israel are mostly Israeli Transverse Mercator. The unit of measurement is meters.

 +proj=tmerc +lat_0=31.73439361111111 +lon_0=35.20451694444445 +k=1.0000067 +x_0=219529.584 +y_0=626907.39 +ellps=GRS80 +towgs84=-24.0024,-17.1032,-17.8444,-0.33009,-1.85269,1.66969,5.4248 +units=m +no_defs


Coordinates used in The Netherlands are mostly Rijksdriehoek coordinates (Amersfoort / RD new). The unit of measurement is meters. The EPSG code is 28992.

 +proj=sterea +lat_0=52.15616055555555 +lon_0=5.38763888888889 +k=0.9999079 +x_0=155000 +y_0=463000 +ellps=bessel +units=m +no_defs


Spanish publications generally use ED50 (Geotrans ref EUR-D), UTM 31 north.


Converting to and from RT90, Using the proj tool.

# from GPS (15.806283 == 15d48.377)
$ proj -r +ellps=WGS84 +proj=tmerc +lat_0=0 +lon_0=015d48.377m +k=1.0000056 +x_0=1500064.1 +y_0=-668.0
# from RT 90
$ invproj -r +ellps=WGS84 +proj=tmerc +lat_0=0 +lon_0=015d48.377m +k=1.0000056 +x_0=1500064.1 +y_0=-668.0