IT:Key:roof:shape
![]() |
Descrizione |
---|
Roof shape type. ![]() ![]() |
Gruppo: Edifici |
Applicabile agli elementi |
Richiede |
|
Combinazioni utili |
Stato: de facto |
|
Strumenti |
|
Wikidata |
Q1156686 |
La key roof:shape=* viene utilizzata per descrivere la forma del tetto di un edificio oppure la forma del tetto di una parte dell'edificio.
Uso del tag
Questo tag richiede un'area taggata come building=* oppure come building:part=*.
Controlla Simple 3D buildings per ulteriori tag utilizzati per descrivere la forma e aspetto di un edificio.
I valori piu comuni sono mostrati sotto, corredati da semplici diagrammi:
Roof shape
You can characterize the roof of a building using a catalogue of well-known roof types.
Image | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
---|---|---|---|---|---|---|
roof:shape | flat | skillion | gabled | half-hipped | hipped | pyramidal |
Image | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
---|---|---|---|---|---|---|
roof:shape | gambrel | mansard | dome | onion | round | saltbox |
Other common values and problems
Value | Comment |
---|---|
saltbox | problematic due to conflicting definitions and meanings of "saltbox" in this context[1]. |
double_saltbox, quadruple_saltbox | As above |
sawtooth | Factory style roofs |
cone,conical | Both used rarely |
side_hipped | Half of a hipped roof, not the same as half-hipped. One vertical gabled side, one 'hip' with three sloped faced. This is common on semi-detached properties where the whole building has a hipped roof but each house has a side_hipped roof |
lean_to | Unclear, probably should be skillion |
shed | Unclear, probably should be gabled or skillion |
gabled_row | Unclear, sometimes used on a sawtooth roof, sometimes a row of gabled terraces |
crosspitched | Cross shaped roof with two gables at 90degrees. AKA Cross gabled roof |



Other roof tags
Key | Comment |
---|---|
roof:orientation=along/across | For roofs with a ridge the ridge is assumed to be parallel to the longest side of the building (roof:orientation=along). But it can be tagged explicitly with this tag. |
roof:height=* | The height of the building (i.e. the height of the façade) is calculated as the building's total height=* minus roof:height=*. |
roof:angle=* | Alternatively to roof:height=*, roof height can be indicated implicitly by providing the inclination of the sides (in degrees). |
roof:levels=* | Number of floors within the roof, which are not already counted in building:levels=*. |
roof:direction=* | Direction from back side of roof to front, i.e. the direction towards which the main face of the roof is looking |
Proposed tags
Some roofs (e.g., square buildings) cannot be accurately modeled with the simple techniques described on this page.
Additional roof shapes are suggested in S3DB_Proposals, including advanced approaches for manual modelling (e.g., ProposedRoofLines or parts of OSM-4D/Roof_table).
This section is a wiki template, editable here.