|Type de toit|
|Utilisé pour ces éléments|
|Statut : de fait|
|Outils pour cet attribut|
La clé roof:shape=* décrit la forme du toit d’un bâtiment ou d’une partie de bâtiment.
Voir Simple 3D buildings pour plus de détails à propros de la forme et l’apparence de bâtiments.
Les valeurs courantes sont décrites ci-dessous :
You can characterize the roof shape of a building using a catalogue of well-known roof types.
Other common values and problems.
|saltbox||Problematic due to conflicting definitions and meanings of "saltbox" in this context. |
|double_saltbox, quadruple_saltbox||As above.|
|sawtooth||Factory style roofs.|
|cone, conical||Both used rarely.|
|side_hipped||Half of a hipped roof, not the same as half-hipped. One vertical gabled side, one 'hip' with three sloped faced. This is common on semi-detached properties where the whole building has a hipped roof, but each house has a side_hipped roof.|
|lean_to||Unclear, probably should be skillion.|
|shed||Mono-pitched roofing, also sawtooth|
|gabled_row||Unclear, sometimes used on a sawtooth roof, sometimes a row of gabled terraces.|
|crosspitched||Cross shaped roof with two gables at 90degrees. AKA Cross gabled roof.|
|many||Marks that building has multiple different roof shapes at once. Such building may have building:part=* carrying own roof:shape values. History described in detail in roof:shape=many|
|roof:orientation=along/across||For roofs with a ridge the ridge is assumed to be parallel to the longest side of the building (roof:orientation=along). But it can be tagged explicitly with this tag.|
|roof:height=*||The height of the building (i.e. the height of the façade) is calculated as the building's total height=* minus roof:height=*.|
|roof:angle=*||Alternatively to roof:height=*, roof height can be indicated implicitly by providing the inclination of the sides (in degrees).|
|roof:levels=*||Number of floors within the roof, which are not already counted in building:levels=*.|
|roof:direction=*||Direction from back side of roof to front, i.e. the direction towards which the main face of the roof is looking.|
|roof:material=*||The outermost material of the roof. Useful in conjunction with roof:colour=*.|
|roof:colour=*||The (dominant) colour of the roof. Useful in conjunction with roof:material=*.|
Some roofs (e.g., square buildings) cannot be accurately modeled with the simple techniques described on this page.
This section is a wiki template, editable here.
- By some users/editors, the roof shape which is shown on this picture may be interpreted as double_saltbox, whereas saltbox then has only one upper roof edge.