Tag:natural=cliff

From OpenStreetMap Wiki
(Redirected from Proposed features/Cliffs)
Jump to navigation Jump to search
Public-images-osm logo.svg natural = cliff
Streisand Estate.jpg
Description
A vertical or almost vertical natural drop in terrain, usually with a bare rock surface. The bottom of the cliff is on the right side of the way. Show/edit corresponding data item.
Rendering in OSM Carto
Natural cliff-125.png
Group: natural
Used on these elements
may be used on nodesmay be used on waysshould not be used on areasshould not be used on relations (except multipolygon relations)
Useful combination
See also
Status: approvedPage for proposal

A  cliff is a vertical or almost vertical natural drop in terrain topography as it occurs for example in form of coastal cliffs or escarpments. The face of the cliff usually consists of bare solid rock but can occasionally also consist of clay, compacted sand, ice or other solid materials - for some materials other than rock natural=earth_bank could be a better choice.

How to map

Orientation example in a coastal place.

To map a cliff draw a way along the edge of the cliff and tag it natural=cliff. The direction of the way should be so that the top of the cliff is on the left side of the way direction and the bottom on the right side. In the ID editor, the arrows on the line should be pointing out to the bottom of the cliff or low land. If the cliff is not perfectly vertical the way should be located on the top edge. Circular cliffs like craters or escarpment outliers can be drawn as closed ways.

You can use name=* tags to name the cliff and height=* for the maximum vertical distance between top and bottom. If there is rock debris at the bottom, use natural=scree to map this.

Nodes tagged natural=cliff can be used to map rock spires.

Artificial cliffs

For artificial cliff like features man_made=embankment and barrier=retaining_wall exist as more appropriate tags.

Ice cliffs

Cliffs usually have a bare rock surface so surface=rock or surface=bare_rock is implied by default. For mapping ice cliffs like at the calving edge of tidewater glaciers you can use surface=ice.

When not to use

natural=cliff should not be used for ridges, i.e. crests where there is a significant drop in terrain to both sides and neither of them is close to vertical. Use natural=ridge or natural=arete instead. Also do not use natural=cliff just for mapping an inclined bare rock surface, use natural=bare_rock instead.

Rendering

Renderers and editors might indicate the lower side of the cliff (the right side of the OSM way) with small triangles pointing downwards.

Related natural features

  • natural=earth_bank - similar feature for landforms created by erosion of earth
    • natural=gully - for narrow gorges/valleys delimited by earth banks on both sides
  • natural=bare_rock - areas of visible solid bedrock
  • natural=rock - isolated, notable rock features connected to the bedrock, mainly single node element
  • natural=stone - large boulders and rocks (glacial erratics or rock fall) not attached to the bedrock, mainly single node element
  • natural=scree - loose angular rock fragments
  • natural=glacier - glaciers
  • natural=arete and natural=ridge - for a mountain stretch with descents to both sides

See also