Id:Key:service
 service
|
| Deskripsi |
|---|
Informasi tambahan mengenai sebuah layanan jalan/re/jalur air, atau tentang layanan yang ditawarkan di sebuah fasilitas bisnis. 
|
| Kelompok: properties |
| Digunakan pada elemen ini |
    |
| Nilai terdokumentasi: 20 |
| Membutuhkan |
| Kombinasi yang berguna |
| Lihat juga |
| Status: de facto |
| Alat untuk tag ini |
Penanda layanan (service) menyediakan informasi tambahan yang tergantung pada konteks dari penanda utama pada obyek yang sama. (service=* seharusnya tidak muncul sendirian.) Ini digunakan untuk menggambarkan detail dari jenis layanan dari jalan tersebut (demikian juga dengan rel kereta atau jalur air), atau layanan yang ditawarkan pada sebuah tempat usaha (bisnis).
Jalan
Penanda layanan dapat digunakan untuk menyediakan lebih banyak informasi untuk sebuah jalan highway=service. Tambahkan sebuah penanda oneway=yes/no jika diperlukan.
service=parking_aisleuntuk jalan parkiranservice=drivewayuntuk jalan akses menuju sebuah rumah atau fasilitasservice=alleyuntuk jalan layanan ke sebuah fasilitas (misalkan jalur servis di belakang apartemen)service=emergency_accessuntuk jalur darurat bagi para anggota pemadam kebakaran, polisi atau ambulansservice=drive-throughuntuk jalan pesan langsung di fasilitas komersil (misalkan jalur pemesanan makanan langsung dari mobil di sebuah restoran cepat saji.)service=slipway[1]service=User Defined
Rel kereta
service=* digunakan untuk menggambarkan trek rel yang minor, yang tetap ditandai dengan railway=*, di stasiun kereta dan emplasemen secara lebih detail.
Trek rel melintas secara lurus melewati sebuah stasiun tanpa belokan kanan atau kiri pada pengalih lajur ditandai usage=main/branch/industrial/military/test tanpa service=*.
Ini berguna untuk map renderer (semisal OSM Carto) yang bisa menyembunyikan trek rel minor pada level pembesaran (zoom) yang rendah dan mesin routing rel kereta yang bisa memilih jalur tercepat melintas di sebuah stasiun (belokan kiri/kanan pada pengalih lajur membutuhkan masinis untuk mengurangi kecepatan).
service=* lebih atau kurang bergantung pada kelas kereta yang menggunakan sebuah rel. Penanda service=* tidak mempertimbangkan apakah sebuah trek rel hanya digunakan oleh kereta lokal atau kereta jarak jauh atau kereta cepat.
service=* dan usage=main/branch hanya tergantung dari persinyalan, kecepatan yang diperkenankan dari trek dan titik-titik tersebut.
 |
Sebuah trek apakah ditandai dengan usage=* atau with service=*! Pengecualian hanya terdapat untuk pelabuhan, industrial, pertambangan, dan jalur kereta militer. Hanya trek-trek tersebut yang ditandai dengan kedua usage=industrial/military dan service=* pada obyek OSM yang sama. |
Lihat juga landuse=railway tentang pemetaan rel dan emplasemen yang tidak dapat diakses.
Emplasemen
service=yardrailway:track_ref=<index number of track>
This tag is used for the tracks at yard stations which are operated by the railway company itself. These are different from spur tracks, usually operated by the "company" (power plant, mine, harbour, factory...) where the spur ends.
The difference between a yard and a siding track is the absense of main signals at yard tracks while siding tracks have main signals.
Some yards have track numbers you can see from outside the yard area. They are tagged using railway:track_ref=*. Sometimes this numbers only can be derived from the signal numbers.
Please note that service=yard usually also encompasses what in UK terminology would actually be called a siding.
Siding track
This tag is used for tracks which run parallel to the main track and are connected to it. These tracks are used by slower trains to be overtaken or to let passengers enter/leave the train if the main tracks do not have platforms. These tracks might be hard to differ from the main tracks in some cases.
Under UK terminology these are usually known as passing or crossing loops. Conversely, please note that what is known as sidings in UK terminology, in OSM usually needs to be tagged as service=yard!
Spur track
This tag is used for short tracks connecting a factory, harbour, mine or power plant to the railway network.
Crossover track
This tag is used for only few metres long tracks connecting to tracks of different directions of traffic. To be found only on double or more tracked railways. Often found in stations and at (crossover) junctions.
If a crossover track connects to spur tracks, it should be tagged with service=spur. Crossover between two service=yard is also service=yard.
Tracks should only be tagged with service=crossover if they connect to tracks which have usage=main/branch/… and no service=* tag.
See http://lists.openrailwaymap.org/archives/openrailwaymap/2015-December/000378.html and https://github.com/gravitystorm/openstreetmap-carto/issues/1971 for discussion.
Trams
Tram tracks are tagged as railway=tram. Tram-specific service=* values were never defined, and editors iD and JOSM use the railway values (crossover, siding, spur, and yard) as presets. However, tram systems rarely have spurs or sidings as seen on mainline railways. Prior to 2019, service=yard, service=siding and service=spur were in practice used interchangeably, except that tracks inside tram yards (garages, depots) were fairly consistently tagged service=yard.
In March 2019, User:Jarek Piórkowski suggests repurposing the railway values with tram-specific meanings to allow future tagging to be more consistent:
- "Normal" tracks have no service tag. These are typically tracks serving a stop where a passenger can expect to regularly board a tram. This would also include tracks that a scheduled tram servicing a route connecting these stops uses (for example end-route loops).
Tram systems can have significant differences between cities, so definition of what are "normal" tracks or what "regular" service is might differ between cities, but try to be consistent within a city/system. service=yardfor tracks within tram storage and work areas ("yards", "garages", "depots" - where trams are parked overnight, maintained, light repairs), and for tracks leading to the yard, provided they don't have regular passenger service stops. Example in Helsinki: 44919957
44919957service=crossoverfor tracks used by double-ended trams to change direction. Only use it between two main tracks with no service tag, otherwise use service tag of the tracks that are connected.service=sidingfor tracks not described above. These will be tracks not used for normally scheduled passenger service, including diversion-only tracks, emergency, non-revenue trackage, as well as turn tracks not used in scheduled service. Example in Berlin: 153424828 153424828
See https://lists.openstreetmap.org/pipermail/tagging/2019-January/042313.html for more information including overview of tagging in January 2019.
Train routes
Can be used in combination with type=route on train routes for the type of train service. This tag should make distinction between different types of train easier beyond borders in order that users do not have to parse reference numbers.
service=tourism(trains for tourists, often historic vehicles),service=night(night trains with sleeping cars),service=car_shuttle(car shuttle trains through tunnels),service=car(long distance trains with double-deck car carrier),service=commuter(urban mass transit service, short headways; e.g., S-train),service=regional(local train),service=long_distance(long distance trains; e.g., InterCity, EuroCity, InterRegio)service=high_speed(high speed trains; e.g., ICE, TGV)
See Public transport#Service routes
Note: Except for service=car being used on Amtrak's Auto Train, tagging service=* on a type=route route=train does not appear to be in wide use in USA (possibly North American) rail tagging. This tagging does seem prevelant in Europe.
Business services
The service tag should not be used to specify the services provided by businesses, including services to vehicles.
For bicycle shops, use service:bicycle=*
Waterways
The service tag can be used to distinguish between open man-made waterways (waterway=canal) for transportation, water power, or irrigation. However, the tag usage=* is now more common for this purpose.
Aerodrome tower
The service tag can be used to mark an Air Traffic Control Tower (aerodrome tower).