Key:building:levels

From OpenStreetMap Wiki
(Redirected from Key:building:level:1,2,3...)
Jump to navigation Jump to search
Public-images-osm logo.svg building:levels
Building-levels.png
Description
The number of above ground levels in the building facades. Show/edit corresponding data item.
Group: buildings
Used on these elements
may be used on nodesshould not be used on waysmay be used on areas (and multipolygon relations)should not be used on relations (except multipolygon relations)
Requires
Useful combination
See also
Status: de factoPage for proposal

The building:levels tag is used for marking the actual number (see value section) of above-ground levels (= floors = storeys) of a building (building=*) or part of a building (building:part=*). The underground levels and the roof do not count as levels here. However, levels that are part-way underground do count (see example below).

It can be useful to also add height=*, especially if the height per level is different for each building part. Keep in mind that height=* includes the roof, while building:levels does not.

Examples

Example

A building (part) with only one ground level will be tagged with building:levels=1.

A building full in the ground (for example an archeological tomb like at  Tierradentro) will be tagged with building:levels=0 + building:levels:underground=1.

Buildings with parts that don't start at ground level

If a building part does not start at the ground level, building:levels=* should include the number of skipped levels below the building part (i.e the number of levels that would exist if the space between the ground and the bottom of the building part were filled with levels of the typical height for this building). The key building:min_level=* should be used to describe the number of skipped levels in this building part.

It is therefore imperative that building:levels=* is always strictly greater than building:min_level=*.

schematic example of level and height tagging

Values

Values should be a positive integer number. Fractional values (like 1.5) are not valid (what is the meaning of a 0.5 floor?) and probably means that the mapper diverted the tags *:levels to express a height instead of using the appropriate tags. The usual dimension is a height of 3 meters for each floor (default floor height used for 3D renderings when the height tags are not specified). Use height and roof:height if a building has unusual dimensions. For example, use building:levels=1 and height=4.5 if the building has one 4.5 m high floor instead of building:levels=1.5.

The height of buildings (in meters) is usually difficult to determine if there is no right data, e.g. from a cadastre. But the default value of 3 meters for one floor is probably a good approximation of the actual height, if you don't know it, for most of the buildings. So you don't need to add the height tags for a normal 4-storey building. If floors are clearly larger or smaller than the default value (for example a sport hall 6 meters high, or a small shelter 2 meters high, or a 4-storey retail building higher than a 5-storey residential building), use the tags height or/and roof:height.

For a better understanding, see Simple_3D_Buildings#Usage_of_height,_roof:height,_building:levels,_roof:levels.

The number of levels is a relative value – you know only how many levels a building has and when drawing building:parts, you give their relative number of levels in relation to the whole building.

Renderer Support

building levels on OSM2World

Renderers which take building:levels=* into account.

See also

Possible tagging mistakes

If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!
If you know places with this tag, verify if it could be tagged with another tag.
Automated edits are strongly discouraged unless you really know what you are doing!